NovaStar CX40 Pro: 4K Processing and 5Gbps Transmission

16-11-2026

Executive Summary: The NovaStar CX40 Pro represents an architectural milestone in professional LED master control, serving as a flagship 4K controller within the next-generation NovaStar COEX control system ecosystem. Engineered with six high-bandwidth 5Gbps Gigabit Ethernet output ports capable of driving up to 9.0 million pixels, a 40Gbps optical port for long-distance remote transmission, and comprehensive 4K 60Hz inputs across HDMI 2.0, DP 1.2, and 12G-SDI, the CX40 Pro integrates seamlessly with the Vision Management Platform (VMP) software. Featuring sub-frame ultra-low latency, Full Grayscale Calibration, Dynamic Booster, and Shutter Sync camera matching, the CX40 Pro is purpose-built for virtual production XR stages, broadcast TV studios, high-end touring rentals, and corporate flagship auditoriums. This engineering guide details hardware parameters, cabling topologies, VMP setup, and comparative benchmarking.

1. Product Positioning and Architectural Core Value

Modern virtual production, broadcast studio sets, and high-density touring LED walls place intense demands on data transmission bandwidth, color depth precision, and camera shutter synchronization. Conventional 1Gbps Ethernet controllers require dense cable bundles and impose processing latency that can disrupt real-time camera tracking. The NovaStar CX40 Pro overcomes these engineering constraints through the groundbreaking COEX architecture.

Key architectural advantages of the NovaStar CX40 Pro include:

• 5Gbps High-Speed Transmission Pipeline: Equipped with six 5Gbps high-speed Ethernet ports, each port delivers quintuple the bandwidth of legacy Gigabit ports, significantly reducing the number of cable runs required across large-scale video walls.

• 4K 60Hz 10-Bit and 12-Bit Color Precision: Supports up to 9,000,000 active pixels at standard 8-bit 60Hz and 4,500,000 pixels at high-fidelity 10-bit and 12-bit RGB 4:4:4 processing, accompanied by a dedicated 40Gbps optical fiber port.

• Shutter Sync Camera Matching Technology: Integrated Shutter Sync technology dynamically phase-locks the LED display refresh cycle to the cinema camera shutter angle, eliminating black scan lines and rolling artifacts in XR virtual production.

• Full Grayscale Calibration and Dynamic Booster: When paired with NovaStar CA50E, CA50C, and XA50 receiving cards, Full Grayscale Calibration and Dynamic Booster elevate grayscale linearity and contrast by up to thirty percent.

• Zero-Frame Ultra-Low Latency: Delivers true zero-frame latency (under one millisecond) between video ingest and LED module output, ensuring synchronization in interactive live broadcast applications.

40Gbps optical port

2. Core Technical Parameters and Engineering Specifications

The hardware parameters of the NovaStar CX40 Pro are defined by high-bandwidth data routing, broad color space transformations, and broadcast-grade synchronization. The following master specification table details verified parameters from official NovaStar documentation.

Technical Dimension

CX40 Pro Hardware Specification

Engineering Notes and Operational Scope

Total Pixel Loading Capacity

Up to 9.0 Million Pixels at 8-bit 60Hz

4.5 Million Pixels at 10-bit or 12-bit 60Hz; 7.5 Million Pixels at 8-bit 120Hz high frame rate

Maximum Output Width and Height

Width up to 8,192 pixels, Height up to 8,192 pixels

Irregular screen canvas support where blank pixels do not count toward total device capacity

5G Ethernet Output Ports

6 times 5Gbps Neutrik RJ45 Ports

Each 5G port drives up to 1,500,000 pixels at 8-bit 60Hz (supports standard 1G compatibility mode)

40G Optical Fiber Output Port

1 times 40Gbps QSFP Optical SFP Port

Transmits uncompressed 40Gbps optical signal to remote stage converters (such as CVT5K and CVT8K)

Video Input Connectors

2x HDMI 2.0 (with loop), 1x DP 1.2, 2x 12G-SDI (with loop)

Full 4K by 2K at 60Hz input support across all digital video ingest interfaces

Audio Ingest and Output

1x SPDIF Digital Audio Port, 1x 3.5 mm Audio In

HDMI audio de-embedding and SPDIF digital audio pass-through

Color Processing Depth

8-bit, 10-bit, and 12-bit RGB 4:4:4 Processing

Full HDR10 and HLG standards compliance with customized 3D LUT cube color profile loading

Video Processing Latency

Zero-Frame Ultra-Low Latency (Less than 1 ms)

Users can select additional zero to two frames of latency compensation for multi-device sync

Broadcast Synchronization

Bi-level and Tri-level Genlock In plus Loop (BNC)

Locks controller frame frequency to external master studio clock generators

Device Control Interfaces

Dual Gigabit RJ45 Control Ports (Ethernet 1 and 2)

Integrated VMP software control, TCP IP network commands, and USB Type-A and Type-B cascading

Power Supply and Consumption

100V to 240V AC, 50 to 60 Hz Universal Input

Rated maximum power consumption 60 Watts with energy-efficient convective cooling

Chassis Form Factor

1U Standard 19-inch Rack-Mount Enclosure

Dimensions 482.6 mm by 372.1 mm by 50.1 mm, net weight 4.5 kg



9.0 million pixels4. Software Ecosystem, VMP Integration, and Commissioning Workflow

The CX40 Pro operates natively within the NovaStar Vision Management Platform (VMP), establishing a modern visual workflow that departs from legacy menu structures:

• Vision Management Platform (VMP): VMP provides an intuitive visual design canvas, enabling live drag-and-drop cabinet mapping, real-time device health monitoring, group color curve adjustments, and 3D LUT look-up table management.

• Shutter Sync and Full Grayscale Calibration: Enables precise synchronization between the LED screen refresh rate and cinema camera shutter speed, eliminating visual artifacts in film production.

Engineering Commissioning Workflow Step-by-Step

Step 1: Physical Mounting and Cabling — Mount unit in standard 19-inch rack, connect AC power, connect 4K video sources (HDMI 2.0, DP 1.2, 12G-SDI), and route 5G Ethernet or 40G optical cables to display cabinets.

Step 2: Network IP and VMP Discovery — Connect control computer to Ethernet Control port, assign static IP address in the local subnet, and launch VMP software.

Step 3: Visual Canvas Mapping — Create a new project in VMP, discover the CX40 Pro controller, and drag cabinet models onto the visual canvas to complete screen pixel mapping.

Step 4: Input EDID Configuration — Select active input source, configure custom EDID parameters (such as 3840 by 2160 at 60Hz), and verify point-to-point pixel matching..

Full Grayscale Calibration

5. Multi-Scenario Engineering Application Analysis

The CX40 Pro is optimized for high-end visual infrastructure deployments where color fidelity and ultra-low latency are essential:

Scenario 1: XR Virtual Production and Film Stages — Driving large-scale curved LED volumes and ceiling canopies with 12-bit HDR color depth and Shutter Sync, ensuring photorealistic in-camera visual effects and realistic specular reflections for film production.

Scenario 2: Broadcast Television Studios and News Sets — Managing uncompressed 12G-SDI studio camera feeds and Genlock synchronization to drive fine-pitch newsroom backdrops with zero camera moire and sub-frame latency.


40Gbps optical port6. Cross-Model Horizontal Comparison and Benchmarking Matrix

Selecting the optimal NovaStar controller requires evaluating Ethernet bandwidth generation, total pixel capacity, and software ecosystem compatibility. The following matrix benchmarks the CX40 Pro against complementary 4K master controllers.

Technical Dimension

NovaStar CX40 Pro

NovaStar CX80 Pro

NovaStar KU20

NovaStar MCTRL4K

NovaPro UHD Jr

Control System Generation

Next-Gen COEX Control System

Flagship COEX Control System

Compact COEX Control System

Legacy Synchronous Controller

Legacy All-in-One Processor

Total Pixel Capacity

Up to 9.0 Million Pixels

Up to 35.0 Million Pixels (Full 8K)

Up to 2.3 Million Pixels

Up to 8.3 Million Pixels

Up to 10.4 Million Pixels

Ethernet Output Ports

6 times 5Gbps Ethernet Ports

16 times 5Gbps Ethernet Ports

6 times 1Gbps Ethernet Ports

16 times 1Gbps Ethernet Ports

16 times 1Gbps Ethernet Ports

Optical Fiber Bandwidth

1 times 40Gbps QSFP Optical Port

4 times 40Gbps QSFP Optical Ports

1 times 10Gbps SFP Optical Port

4 times 10Gbps SFP Optical Ports

4 times 10Gbps SFP Optical Ports

Native Software Platform

VMP Vision Management Platform

VMP Vision Management Platform

VMP Vision Management Platform

NovaLCT and SmartLCT Suites

NovaLCT and SmartLCT Suites

Shutter Sync and Dynamic Booster

Fully Supported (with CA50E and XA50)

Fully Supported (with CA50E and XA50)

Supported (Basic COEX Features)

Not Supported (Legacy Hardware)

Not Supported (Legacy Hardware)

Video Processing Latency

Zero-Frame Mode (Less than 1 ms)

Zero-Frame Mode (Less than 1 ms)

Low Latency Supported

Standard Processing Latency

Low Latency Supported

Target Application

XR Virtual Production, High-End Rental

Mega XR Stages, 8K Stadium Displays

Commercial Retail, Small Auditoriums

Fixed 4K LED Walls, Broadcast Sets

Touring Rental, Staging Events

9.0 million pixels

7. Frequently Asked Questions (FAQ) and Procurement Guidelines

Q1: 5Gbps High-Speed Bandwidth Advantages — Question 1: What engineering benefits do 5Gbps Ethernet output ports provide compared to traditional 1Gbps ports?

Answer: Each 5Gbps port delivers up to 1,500,000 pixels at 8-bit 60Hz, reducing the total number of Ethernet cable runs by up to eighty percent and simplifying cable management in rental staging and fixed installations.

Q2: Receiving Card Compatibility — Question 2: Which receiving cards are required to achieve Full Grayscale Calibration and Dynamic Booster on the CX40 Pro?

Answer: These advanced COEX features require NovaStar CA50E, CA50C, or XA50 receiving cards paired with compatible driver ICs and pre-generated .ncp cabinet calibration files.

Q3: Copper Cabling Specifications — Question 3: Can the CX40 Pro output signal over standard Cat6A copper cables?

Answer: Yes. The 5Gbps Ethernet ports operate over standard high-quality Cat6A shielded twisted-pair cables up to 100 meters, or standard 1Gbps mode over Cat5e cables.



Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy